Tram Fleet - 2 - Melbourne M-Class Tram

 This was my first tram acquistion, being an Australian-sourced kitset which I built in 2007. It is beginning to show it's age, but I am reluctant to refurbish it as I do not wish to lose the neat decals.

It was originally powered by straight DC, but has now been converted to DCC using a LaisDCC decoder. I have added interior lights, operated from the decoder's extra function.

When I started converting the layout to DCC, I had abandoned this tram as it had stopped running some years ago. However, a few weeks ago I dismantled it and, after some cleaning, found the motor still worked as well as it ever had done. It now runs superbly.

Melbourne M-Class Tram
as restored & operated at Bendigo Tramways



Bendigo M-Class

Comments

Post a Comment

Popular posts from this blog

History of the layout

Image
Hannover Tram by Kato  I built this layout around 2007, as a change from my (then current) On30 obsession. It was built from the start to use live overhead wiring, thus both rails of the track are common electrically. Control was exercised by a PICAXE microprocessor which controlled two latching relays, each responsible for one tram on it's loop. All wiring and electronics was accommodated under the layout in a 40mm deep base. The layout also utilised a Dreamplayer sound board which provided the tram bells as required. The underside of the original layout as described above. I took this micro-layout to several train shows, where it sparked a lot of interest, being such a change from large train layouts. In 2023, having long-since sold all of my On30 gear, I decided to rebuild the museum layout, using the recently-discovered and impressive DCC-EX project (see www.dcc-ex.com). I had a long history with DCC, primarily with Digitrax and with a large number of 3rd-party add-on LocoNe...
Read more

Mike Rowe Tramway Museum introduction

Image
 The Mike Rowe Tramway Museum is a 500mm x 500mm 'micro' (hence the name) layout, featuring several assorted trams (or streetcars in American parlance). The HO scale layout features two interleaved loops, with one tram running on each loop. One tram remains at a designated stop whilst the other runs around it's loop. When the loop run is completed, it stops and the other tram leaves for a run around it's loop. All of this action, along with color-light signaling is managed by an Arduino Mega 2560 R3 processor, with an  Arduino Motor-Shield and a wi-fi shield. This setup runs DCC-EX software in Automation mode. The Arduino units may be seen inside the Museum building below, with the roof removed. DCC-EX is a free package, providing genuine DCC functionality at a very-affordable price. The above-described package can be put together for less than NZ$80.00, without the non-essential wi-fi shield.
Read more